Install the chain
Keep your fingers away from the chain and guide bar area when pressing
the latch to prevent pinching. Also make sure there are no foreign objects
between the chain and the guide bar while pressing the latch.
NOTE:
How to Replace The Chain
3. After installing the chain, press the chain lock button to the right,
and the guide pin will automatically lock the chain.
2. Install the guide plate and chain
to ensure that the direction of the
chain blade is correct.
1. Clean the motor to ensure that
there is no debris.
Chain Blade Directon
lock buon
5. Make sure the cover plate is in a
tightly closed state before tightening
the nut clockwise.
4. When covering the cover plate,
lift up the mudguard and then put
the cover plate in place.
EN.10
To Next Page
Loading...
Need help?
General
