Chainsaw Safety Precautions
1. Do not forced use the chainsaw. Apply the correct power tool for
your application. The correct power tool will do the job better and
safer at the rate for which it was designed.
2. Do not use the chainsaw if the switch can not be turned on and off.
Any chainsaw that cannot be controlled with the switch is dangerous
and must be repaired.
3. Disconnect the plug from the power source and/or the battery
packfrom the chainsaw before making any adjustments, changing
accessories, or storing chainsaw. Such preventive safety measures
reduce the risk of unexpected start.
4. Store unused chainsaws out of the reach of children. Do not allow
people unfamiliar with chainsaws or these instructions to operate
them. Chainsaws are dangerous in the hands of untrained users.
5. Maintain the chainsaw. Check for misalignment or binding of moving
parts, broken parts and any other conditions that may affect chainsaw
operation. If there is damage, have the chainsaw repaired before use.
Many accidents are caused by poorly maintained chainsaws.
6. Keep cutting tools sharp and clean. Properly maintained cutting
tools have sharp cutting edges that are less prone to knotting and
easier to control.
7. Use the chainsaw and accessories in accordance with these
instructions, taking into account the working conditions and the work
to be performed. Using the chainsaw for operations different from
its intended use may result in hazardous situations.
8. Children should be supervised to ensure that they do not pla
with chainsaws.
EN.12
To Next Page
Loading...
Need help?
General
