Orcam READ - Page 12

○ You may also say, “Settings Help” or “Settings Commands”.
● “Help Smart Reading”
1
○ OrCam Read will list all of the available commands for the Smart Reading
feature.
○ To learn all of the Smart Reading commands, visit the “Smart Reading” section of
this user manual.
○ You may also say, “Smart Reading Help” or “Smart Reading Commands”.
TELL COMMANDS
● “Tell the Date”
○ OrCam Read will announce the current date.
● “Tell the Time”
○ OrCam Read will announce the current time.
● “Tell the Build”
○ OrCam Read will announce your device’s software version.
● “Tell the Battery Status”
○ OrCam Read will state the battery level as well as whether your device is
currently charging or not.
● “Tell the Device Serial Number”
○ OrCam Read will state the external and internal IDs of your device.
SETTINGS COMMANDS
● “Volume Up”
○ OrCam Read will raise the device’s volume one level.
● “Volume Down”
○ OrCam Read will lower the device’s volume one level.
● “Reading Speed Up”
○ OrCam Read will now speak and read at a faster rate.
● “Reading Speed Down”
○ OrCam Read will now speak and read slower at a slower rate.
● “Enter the User Menu”
○ OrCam Read will enter the audio settings menu.
● “Change the Voice”
○ OrCam Read will ask whether you want to change the default system voice per
language.
● “Change the Auto Suspend Time”
○ OrCam Read will ask you to choose the amount of time the device should wait in
an idle state before automatically going into Suspend mode.
● “Enable the Reading Navigation”
○ OrCam Read will enable reading navigation, which will allow you to pause,
resume, fast forward, and rewind during reading.
● “Disable the Reading Navigation”
○ OrCam Read will disable reading navigation.
1
Only available upon purchase.