Orcam READ - Vocal Command Interface

The following commands can be used at any time as long as you take a picture of these
command-sentences using the mouse laser pointer.
OrCam Please Tell Build
Use this command to find out the software version of your OrCam Read.
OrCam Please Enter User Menu
Use this command to enter the audio settings menu of your OrCam Read.
OrCam Please Connect to Bluetooth Audio Device
Use this command to connect your OrCam Read to a Bluetooth audio device.
OrCam Please Tell Time
Use this command to have OrCam Read announce the current time.
OrCam Please Tell Date
Use this command to have OrCam Read announce the current date.
Vocal Commands.
OrCam vocal commands can be used to easily control your OrCam Read, change settings, and
receive information.
To use them:
1. Rapidly press the trigger button twice. You will hear a long beep.
2. Say the vocal command. You will then hear a chime.
3. OrCam Read will then tell you the information, change the setting, or ask you to provide
more information to change the setting.
Available Vocal Commands Based on Categories
HELP COMMANDS
● “Help General”
○ OrCam Read will list all of the available commands containing the word “Help”.
○ You may also say, “General Help” or “Help Commands”.
● “Help Tell”
○ OrCam Read will list all of the available commands containing the word “Tell”.
○ These commands will help you receive general information (such as the time or
date) or information about the device (such as the software version or device
serial number).
○ You may also say, “Tell Help” or “Tell Commands”.
● “Help Settings”
○ OrCam Read will list all of the available commands that will help you modify your
device’s settings.