OREC SF600 - Table of Contents; Contents; Specifications; Check List

OREC SF600/600D
3
CONTENTS
INTRODUCTION ............................................................................................................................. 2
CONTENTS .................................................................................................................................... 3
SPECIFICATIONS .......................................................................................................................... 3
CHECK LIST ................................................................................................................................... 3
SAFETY RULES ............................................................................................................................. 4
DIFFERENT PARTS OF THE MACHINE ........................................................................................ 5
SAFETY INSTRUCTION STICKERS .............................................................................................. 6
CONTROLS .................................................................................................................................... 7
MAINTENANCE OPERATIONS TO BE CARRIED OUT BY THE USER....................................... 12
BREAKDOWNS AND SOLUTIONS .............................................................................................. 15
TIGHTENING TORQUES (Kgf.cm)(SF600) .................................................................................. 16
TIGHTENING TORQUES (Kgf.cm)(SF600D) ................................................................................ 16
EC CONFORMITY DECLARATION .............................................................................................. 17
MEASUREMENT OF VIBRATIONS .............................................................................................. 17
EC CONFORMITY DECLARATION .............................................................................................. 18
MEASUREMENT OF VIBRATIONS .............................................................................................. 18
LIMITED WARRANTY ................................................................................................................... 19
NOTES .......................................................................................................................................... 19
SPECIFICATIONS
CHECK LIST
INSTRUCTIONS TO THE DEALER
• The assembling, the installation and the first application of the machine is under the OREC dealer’s responsibility.
• Read the instruction manual as well as the safety measures. Check that all the before delivery and at delivery check
points specified in the following lists have been verified and possibly modified before delivering the machine to its owner.
CHECKS BEFORE DELIVERY
• Check that all the shields, grids and safety guards are in place and in a good state.
• Check that the hoses are in place and in a good state. Replace them if necessary.
• Check that there is no oil leak, repair if necessary.
Model
SF600
SF600D
Weight
81kg
83kg
L x W x H (mm)
1690 x 590 x 970
1690 x 590 x 970
Forward speed (km/h)
(1): 1.16
(2): 4.48
(1): 1.16
(2): 4.48
Reverse speed (km/h)
(R): 1.16
(R): 1.16
Tool speed (rpm)
Forward : 228
Reverse : 228
Forward : 203
Reverse : 209
Working width(cm)
52
52
Engine
Honda GX160
Honda GX160
Engine power(kw)
4.1
4.1
Engine speed (tr/min)
3100
3100
Fuel Tank (L)
3.10
3.10