17
REPLACING THE FILTERS
4
Line up and ret the new lters into
the unit.
5
Line up tabs on the bottom of the lter,
cover with the tabs on the unit. Push
the cover until it clicks into place.
6
Plug in and press the ‘on’ button. After replacing
lters, insert a small blunt instrument such as a pen
into the “reset lter” insert. Press down to determine
which lter to reset. The life bars will fade to show
which lter is selected. Once the correct lter is
selected, keep pressing down until you hear a beep,
then release. The life bars will begin ashing and
then turn solid to show the lter has been reset.
CONTACT OUR CUSTOMER CARE LINE
1-800-989-3535 (U.S.) or 1.888.676.7325 (Canada)
To Next Page
Loading...
Need help?
General
