To Next Page

To Previous Page

Troubleshooting

Problem Possible Cause Possible Solution

Unit doesn’t run. 1. Power Cord 1. Plug in power cord.

2. On/Off Switch 2. Push the On/Off Switch rmly to turn on.

3. Wall outlet 3. No voltage in wall plug. Check fuse or breaker in home.

4. Blown fuse or tripped breaker 3. Replace fuse or reset breaker in home.

5. Front cover is off 5. The front cover may not be secure, check the front cover is securely tted.

6. Timer may have nished 6. Reset the timer.

Why is water leaking from my

machine?

1. The unit has not been positioned correctly. 1. Make sure machine is on a at surface.

2. The water tank cap has not been tightened. 2. Tighten water cap.

WARNING TO REDUCE THE RISK OF PERSONAL INJURY, UNPLUG BEFORE CLEANING OR SERVICING.

Service problems can often be solved easily at home. Use this guide to help you troubleshoot. Any other servicing should be done by an authorized service

representative. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center prior to