21
Once Filter Replacement
indicator light illuminates,
remove the cover filter.
4
Lock the filter into place by
sliding the filter lock the right.
Refit the filter cover.
5
After cover is refit, hold down
Filter Replacement indicator
button for 5 seconds to reset the
air purifiers indicator light.
Slide the filter lock to
the left. (Unlock position).
3
Carefully pull the
used filter out.
3
Slide replacement filter
into the unit.
Replacing the 3-Stage Filter
CAUTION! TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE CLEANING AND SERVICING. IMPORTANT! THE FILTERS ARE NOT WASHABLE.
Clean dust sensor every time a
filter is replaced by gently wiping
clean with a cotton swab. This will
help ensure the air purifier
continues to operate at maximum
performance.
Dust Sensor is located
on the back of the unit.
Remove any plastic coverings
from new filter(s) before installing.
Replace 3-Stage filter according to indicator light.
8
To Next Page
Loading...
Need help?
General
