3
Standard Fastener Hardware Listing
THERMAL PROTECTOR
W/LEAD WIRE
BLACK
WHITE
C 2004 ORECK HOLDINGS, LLC. ALL RIGHTS RESERVED. PRINTED IN U.S.A.
SWITCH
73045-01
IMPORTANT SAFETY NOTES:
WHICH INCLUDES:
MOTOR
LARGE MOTOR MOUNT
MOTOR MOUNT REAR (SMALL)
WIRENUT
BLACK
85 C
PTC
ALL TERMINALS ARE QUICK SLIDE.
IF TERMINAL ON WHITE LEAD FROM CORD,
STRIP INSULATION FROM CORD & USE WIRENUT.
NOTES:
WHEN REPLACING THE MOTOR FOR BB280, BB850, BB870, BB900 OR BB1000 USE KIT #09-72158-01
WHEN REPLACING THE MOTOR FOR BB1100 USE KIT #09-73058-01
RH
SCHEMATIC DIAGRAM
WIRING DIAGRAM FOR MOTOR KIT
COMPACT CANISTER VACUUM
WIRING DIAGRAM
MOTOR
STRAIN
RELIEF
REV. D
UNPLUG UNIT BEFORE SERVICING.
REPLACEMENT OF MOTORS SHOULD ONLY BE DONE BY
AN EXPERIENCED ELECTRICIAN OR AN AUTHORIZED
ORECK SERVICE CENTER.
PLUG
TERMINAL
WIRENUT
Wiring Diagram
22 Pin, .125 x .5 03-00474-01M Carrying Strap 2 n/a 100
26 Screw, #8 -10 X .5” Plt 30 Zinc 03752-01M Feet / Handle 4 / 4 13 - 16 100
27 Screw, #8 x .88” 03754M Housing 5 13 - 16 100
28 Screw, #8 - 10 x 1/2” 03-00471-01M Housing Door Knob 1 13 - 16 100
39 Wire Nut 71B 16 - 22 AWG 03-00599-01M 1 35 - 55 100
# FASTENER FASTENER PART THAT QTY TORQUE QTY
DESCRIPTION PART NO. FASTENER IS USED ON REQ’D RANGE PER
(in/lb) PKG.
To Next Page
Loading...
