Cleaning the Truman Cell
®
Note: The Truman Cell
®
may require more frequent clean-
ing if “arcing” occurs. Arcing is a sharp snapping sound that
occurs when large particles are collected in the Truman Cell
®
.
If prolonged or continuous arcing occurs, the Truman Cell
®
should be cleaned.
1. Unplug the air purier.
2.
Open the Cover by
gently pulling from the
top corners.
3. Remove the Truman
Cell
®
by unlocking top
and bottom knobs and
pulling straight out.
4. Separate the Truman
Cell
®
from the Wire
Assembly for easier
access to each during
cleaning.
5. Place each in sink,
Cleaning the Pre-Filter
1. Unplug the air purier.
2.
Open the Cover by gently pulling from the top cor-
ners.
3. Pull the Pre-Filter straight out of the Cabinet.
4. Thoroughly rinse the Pre-Filter and let it air dry be-
fore placing it back in the Cabinet. Do not use heated
or compressed air as part of the drying process.
5. Slide the Pre-Filter back into the unit.
6. Close the Cover securely.
9
1
2
3
3
1