Oreck ProShield Air Purifier - Scheduled Maintenance; Replacing the Optional Odor Absorber

10
Replacing the Optional Odor Absorber
Note: The Odor Absorber can be removed and replaced in the
Oreck ProShield Air Purifier only.
1.Unplug the air purifier and lay it on its side with the hinged
cover on top.
2.

Open the Top Cover by pressing the Cover Release button.
3. Flip up the two tabs located on top of the Odor Absorber.
4. Use the tabs to gently lift the odor absorber from the cabinet.
5. ReplacewithanewOdorAbsorber.Foldthetabsdown.Do
not force the Odor Absorber into the slot.
6.Close the Top Cover securely.
Maintenance
1
2
3
4