Oreck Steam 50 User Manual

10
C
L
O
S
E
O
P
E
N
4. Put the cap on the water tank and close completely. Place
the tank back into the body. Check that the water tank is
properly seated.
5. Slide the clamp over the top of the water tank and close
the lock.
6. Vacuum or sweep the oor completely before using the
steam cleaner.
7. Plug the power cord into a polarized electrical
outlet. Wait approximately thirty seconds for
the steam indicator to light up.
8. Adjust the Steam Switch Knob to the desired
level of steam.
Begin Cleaning
1. Pull back on the handle to release
the steamer.
Important! Steam will stop
automatically when the unit
is in the upright position.
2. Move the steam cleaner
slowly back and forth across
the oor.
Indicator light
Steam switch knob
Upright
position

Oreck Steam 50 Specifications

General

Brand	Oreck
Model	Steam 50
Category	Steam Cleaner
Language	English