What to do if my Oreck STEAM 75 75 will not run?
First, ensure the vacuum cleaner is firmly plugged into the wall outlet. Then, check the electrical source, such as the fuse or circuit breaker. If the power cable is damaged, contact Oreck for service.
Why is no steam emitted from my Oreck STEAM 75 75 when it is on?
There could be several reasons why your Oreck Vacuum Cleaner isn't emitting steam: * The water tank may be empty, so refill it. * The hard water filter may be clogged, so change the water filter. * Pull the trigger on the handle to release steam.
General| Weight | 5.2 lbs |
|---|---|
| Heating Time | 30 seconds |
| Steam Time | 20 minutes |
| Water Tank Capacity | 16 oz |
| Tank Capacity | 16 oz |
| Voltage | 120V |
| Power | 1500W |
| Attachments | Squeegee |
Essential safety precautions to reduce risk of fire, shock, or injury when using the steam cleaner.
Identification of the main parts and accessories included with the Oreck Steam 75 cleaner.
Details of the rear components of the steam cleaner, including trigger and cord clips.
Listing and identification of the included accessories like cleaning pads, carpet glider, and measuring cup.
Protects internal components from mineral buildup caused by hard water.
Provides flexibility and ease of movement during steam cleaning.
Used for cleaning hard surfaces effectively.
Attaches with the microfiber pad to refresh carpets.
Steps to prepare the steam cleaner, including filling the water tank correctly.
Procedure for safely emptying the water tank after the steam cleaner has cooled down.
Instructions for washing and drying the microfiber cleaning pad using mild detergent.
Guidance on when and how to replace the hard water filter for optimal performance.
Information on ordering specific replacement parts like filters and bonnets.
To Next Page