Oreck STEAM 75 75 - Troubleshooting

18
Trouble-
shooting
Problem Check Solution
Cleaner will
not run
•Notpluggedin
properly.
•Walloutletis
faulty.
•Thepowercable
is damaged.
•Besuresteameris
firmly plugged into
wall outlet.
•Checkelectrical
source – fuse or
circuit breaker.
•Ifpowercableis
damaged, contact
Oreck for service.
Steam is not
emitted when
the steam
cleaner is ON.
•Watertankis
empty.
•Hardwaterlter
is clogged.
•Thesteamswitch
is not activated
properly.
•Fillwatertank.
•Changewaterlter.
•Pullthetriggeron
the handle to release
steam.
Unit still does
not operate
properly.
Check all the above
points.
Contact Oreck for
service.
Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing this
guide. All other servicing should be done by an Oreck
authorized service center.