Oreck XL PRO FMH Series

To Next Page

Motor plugs in at

handle base / for

easy maintenance

Safety enhanced

non-conductive dual

triggers / eliminates

shock potential

Fully adjustable handle

position / comfortable

for all operators

All metal

chassis / added

weight for

faster results

Non-marking, fixed

6" wheels / for easy

transport

Precision balanced,

heavy-duty 66-frame

motor / for

easier operation

Non-marking full

wrap bumpers /

protects floors,

walls and

baseboards

Safety enhanced

interlock switch /

both hands are

conveniently

in control

Triple-planetary high torque

transmission / handles

the most demanding

applications

SPECIFICATIONS

104 lbs 106 lbs 107 lbs 108 lbs

AC 2 capacitor

Part Number

Machine Size 15” 17” 19” 21”

Weight

Brush Speed 175 RPM 175 RPM 175 RPM 175 RPM

Motor 1.5 HP 1.5 HP 1.5 HP 1.5 HP

Motor Type

Amp Draw 13-15 amps

Chassis Polished aluminum

Cord 50’ Safety red14/3 Ga.

Drive “B” style clutch

Wheels 6” non-marking

Warranty 5 years motor and gearbox

XLH-15E XLH-17E XLH-19E XLH-21E

XL PRO™ FMH Series

Heavy-Duty Floor Machine

175 RPM - 1.5 HP

15”, 17”, 19”, and 21”

First

choice for spray

buffing, scrubbing

stripping,

shampooing

and bonnet

cleaning

PROFESSIONAL GRADE

ORECK XL

New Equipment Warranty

Limited Warranty

The manufacturer gives you the following limited warranty for this product if it was originally

purchased for use, not resale, from Oreck or an Oreck Authorized Retail Dealer.

The manufacturer will repair or replace, free of charge, to the original purchaser, any part which is

found to be defective in material or workmanship within six (6) months of the date of purchase;

five (5) years on the motor and gear box.

Drive belts, brushes, and other parts subject to normal wear are not covered by this limited

warranty.

This limited warranty does not apply to any part subjected to accident, abuse, or alteration, misuse,

damage caused by fire or act of God, the use of voltages other than indicated on the serial number

plate of this product or service of this product by other than a trained service technician.

The manufacturer does not authorize any person or representative to assume or grant any other

warranty obligation with the sale of this product.

The manufacturer's limited warranty is valid only if you retain proof of purchase from Oreck or an

Oreck Authorized Retail Dealer for this product. If you purchase this product from any other

source, your purchase is "AS IS," which means the manufacturer grants you no warranty, and that

you, not the manufacturer, assume the entire risk of the quality and performance of this product,

including the entire cost of any necessary servicing or repairs of any defects.

The manufacturer's liability for damages to you for any costs whatsoever arising out of this

statement of limited warranty shall be limited to the amount paid for this product at the time of

original purchase, and the manufacturer shall not be liable for any direct, indirect, consequential or

incidental damages arising out of the use or inability to use this product.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED IN DURATION TO THE WARRANTY PERIOD, AND NO WARRANTIES,

WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.

Some states do not allow limitations on the duration of implied warranties, so the above limitation

may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from

state to state.

All word marks, logos,product configurations and

registered trademarks are owned and used under

the authority of Oreck Holdings, LLC.

Oreck Corporation

100 Plantation Road

New Orleans, LA 70123

Commercial Sales: (800) 242-1378

Main Page

Need help?

Do you have a question about the Oreck XL PRO FMH Series and is the answer not in the manual?

Summary

Limited Warranty

New Equipment Warranty Details

Manufacturer's warranty terms, coverage, and limitations for new equipment.

Product Specifications

Technical Specifications

Key technical details and measurements for the Oreck XL Pro FMH Series Floor Machine.

Safe Operating Conditions

Risk Reduction and Safety Precautions

Guidelines to minimize fire, electric shock, and injury risks during operation.

Scrubbing Brush Filaments

Describes various bristle types for Oreck floor machine brushes and their applications.

Brush and Pad Driver Construction

Brush Construction Details

Information on brush block diameter, bristle length, and material for optimal use.

Pad Driver Construction

Details how to use pad drivers with non-woven pads and their size requirements.

Electrical and Grounding Information

Electric Power Requirements

Specifies voltage, amperage, and frequency requirements for the floor machine.

Grounding Instructions

Explains the importance of grounding and how to ensure proper electrical safety.

Extension Cord Usage

Guidance on the use and recommendation against using extension cords.

Installation and Assembly

Handle Installation

Step-by-step guide for assembling and adjusting the machine handle for comfortable use.

Operating and Transport Procedures

Operating Tips

Advice for efficient and safe operation, including starting, stopping, and handling.

Transporting the Floor Machine

Instructions on how to safely move the floor machine between locations.

Troubleshooting

Machine Will Not Run

Diagnoses common reasons why the floor machine fails to start or operate.

Electrical Shock Issues

Addresses causes and solutions for electrical shock incidents during operation.

High Vibration Problems

Identifies causes of excessive vibration and methods for correction.

Parts Identification

Exploded View and Parts List

Diagram and a detailed list of all components for the Oreck Heavy-Duty Floor Machine.

The Oreck XL Pro FMH Series Heavy-Duty Floor Machine is a robust and versatile piece of equipment designed for professional floor care, capable of handling a variety of tasks including spray buffing, scrubbing, stripping, shampooing, and bonnet cleaning. This machine is built for durability and ease of use, making it a reliable choice for maintaining various floor types.

Function Description

At its core, the Oreck XL Pro FMH Series is a powerful floor machine that utilizes a rotating brush or pad driver to perform floor cleaning and maintenance tasks. The machine operates at 175 RPM and is powered by a 1.5 HP motor, providing ample power for demanding applications. The triple-planetary high torque transmission is a key feature, designed to handle the most challenging jobs without strain.

The machine's operation is straightforward, with safety features integrated for user protection. It is designed for indoor use only and should not be exposed to rain or used in outdoor environments. The motor is air-cooled, and its vents must be kept free of debris to ensure proper functioning and prevent overheating. It is crucial not to use the machine as a floor sander.

For starting the machine, a safety enhanced interlock switch and non-conductive dual triggers are employed. Both hands are conveniently in control, and the dual triggers eliminate shock potential. To begin operation, the handle must be unlocked by raising the locking lever, and then lowered to a comfortable waist height. The handle is then relocked by pushing the lever down. The red safety interlock switch must be pushed forward to unlock the dual triggers, which are then squeezed to release power to the motor. Once power is on, either trigger will keep the motor engaged. To stop the machine, both triggers are simply released.

The machine's movement is influenced by the spinning brush or pad. Lifting the handle slightly causes the machine to move to the right, while pushing the handle down slightly moves it to the left. This intuitive control allows operators to guide the machine effectively across the floor.

Usage Features

The Oreck XL Pro FMH Series is designed with several features that enhance its usability and performance across different floor care applications.

Adjustable Handle Position: The handle is fully adjustable, allowing operators of varying heights to find a comfortable working position. This ergonomic design reduces fatigue during extended use. The handle mounting collar slides freely up and down the handle tube, and once the desired height is set, the cam-engineered locking lever firmly fixes the handle in place.
Brush and Pad Driver System: The machine accommodates both brushes and pad drivers, making it adaptable to various cleaning needs. Brushes are typically used for scrubbing, while pad drivers are used with non-woven pads for scrubbing or polishing. The machine uses a "B" style drive plug, which connects to a "B"-style or "Universal" clutch plate on the brush block or pad driver. Brushes should have a block diameter 2" less than the machine apron size, while pad drivers should have a block diameter 1" less than the machine apron size, especially when using a riser.
Scrubbing Brush Filaments: A wide range of scrubbing brush filaments are available, each suited for specific tasks and floor types.
- Nylon: Ideal for general scrubbing, gentle scrubbing, mopping, and polishing of decorative floors. It softens when wet, preventing scratches on tile, terrazzo, or coated surfaces, and is durable.
- Polypropylene: A common choice for general-purpose scrubbing on concrete and coated floors. While effective, it typically has a shorter lifespan than nylon.
- Non-Scuff Poly: A finer filament (0.015-0.018") designed for lighter-duty scrubbing on waxed or finished floors.
- Bassine: A soft natural fiber that builds a polishing surface due to its split or "flagged" bristle ends.
- Union Mix: A stiffer blend of Bassine and Tampico, traditionally used for scrubbing, often replaced by poly.
- Soft Abrasive Bristle: A 0.018" Nylon filament with 500-grade grit, comparable to a white scrub pad, for gentle scrubbing.
- Daily Abrasive Bristle: A 0.035" Nylon filament with 180-grade grit, similar to a red scrub pad, for daily scrubbing of resilient tile and finished floors.
- Stripper Abrasive Bristle: A 0.022" Nylon filament with 120-grade grit, comparable to a blue scrub pad, for aggressive scrubbing and light stripping of resilient floors, terrazzo, and concrete.
- Heavy Duty Stripper Abrasive Bristle: A 0.050" Nylon filament with 80-grade grit, similar to a black scrub/strip pad, for very aggressive scrubbing and stripping of concrete, brick, and quarry tile.
Non-Marking Components: The machine features non-marking, fixed 6" wheels for easy transport and non-marking full-wrap bumpers that protect floors, walls, and baseboards from scuffs and damage during operation.
All-Metal Chassis: The all-metal chassis provides added weight, which contributes to faster and more effective results during cleaning tasks.
Electrical Safety: The machine is built with a 3-wire cord and a 3-prong grounding type plug to protect the operator from electrical shock. It is crucial to use a properly grounded outlet. The manual explicitly warns against cutting off the grounding prong or using ungrounded adapters in Canada. A ground fault interrupter device can be used to check if an outlet is properly grounded.

Maintenance Features

Proper maintenance is essential to ensure the longevity and optimal performance of the Oreck XL Pro FMH Series. The machine is designed with several features that facilitate easy maintenance.

Motor Plug-in at Handle Base: The motor plugs in at the handle base, simplifying access for maintenance and troubleshooting.
Regular Inspection and Cleaning: Operators are advised to inspect and maintain the equipment on a regular schedule. This includes checking and cleaning pads after each operation, removing soil and chemical buildup, and replacing worn or damaged pads. Brushes should be washed and hung to dry, and the machine should never be stored standing on the brush.
Vent Maintenance: The air-cooled motor's vents must be kept free of dust and debris. Air pressure or a vacuum can be used to clear the vents, preventing overheating and ensuring efficient motor operation.
Cord and Switch Inspection: The power cord, triggers, and switches should be regularly checked for proper operation and any signs of damage. Any damaged skirts or bumpers should also be repaired or replaced.
Troubleshooting Guide: The manual provides a troubleshooting section to address common issues such as the machine not running, electrical shock, or high vibration. It guides users through basic checks like verifying the circuit breaker, ensuring the equipment is plugged in, and testing the power cord. For more complex issues or if the motor sparks or smokes, seeking authorized repair service is recommended.
Warranty: The manufacturer provides a limited warranty covering defects in material or workmanship for six months, with a five-year warranty on the motor and gearbox. This warranty is valid only if the product is purchased from Oreck or an Oreck Authorized Retail Dealer and proof of purchase is retained. Normal wear parts like drive belts and brushes are not covered. The warranty is voided by accidents, abuse, alteration, misuse, damage from fire or acts of God, use of incorrect voltages, or service by untrained technicians.

In summary, the Oreck XL Pro FMH Series Heavy-Duty Floor Machine is a powerful, versatile, and user-friendly floor care solution, designed with a focus on performance, safety, and ease of maintenance for professional applications.