Oregon Scientific ATC9K - Firmware Update Procedure

- 11 -
4. Time Stamp
Date and time will be stamped on the videos and photos with this setting being
turned on.
5. LCD Sleep
This setting controls the sleep time of the LCD screen. While the LCD is
sleeping, power consumption is reduced.
6. Auto Off
Sometimes you may want the camera to turn off automatically during idle.
Set your preference here to do so.
7. Date
Set your date here.
8. Time
Set your time here.
9. Timezone
Set your timezone here.
10. Language
Set your system language here.
11. Light Freq. (Light Frequency)
In order to avoid ickering in the video while shooting indoors, you need to adjust
this setting to match the frequency of light source with that of the shutter.
12. Format
You can format the microSD card inserted in the camera with this setting.
13. Factory Set. (Factory Settings)
Restore back to the factory default settings.
14. Version
Display the current system version.
Firmware update
1. Visit Oregon Scientic website atc.oregonscientic.com/ to download the latest
rmware.
2. Unzip the package and copy the
unzipped le to the root folder of
the microSD card.
3. Insert the microSD card to the
ATC9K and turn it on.
4. To conrm the update, press .
The camera will be switched off.
5. Press to restart the camera.