Oregon Scientific ATC9K - G Sensor Viewer; PC Application Update; Connecting to a Monitor; Playback on Monitor

- 20 -
UK
G Sensor Viewer
1. This viewer is a pseudo-sphere showing resolved
accelerations with directions and magnitudes,
which are represented by the black line.
2. The length of the lines is magnitude.
3. The motions and the length variations of the line
will follow the data from the .MAP le.
Application Update
While you are connecting to the internet, the PC application will check for any
updates automatically. You can either accept it or update the application manually by
pressing the update icon at the top right corner.
XIV) Connecting to a Monitor
You can playback your recorded video footages and
photos on a high denition enabled monitor using the
HDMI cable provided.
1. Turn the ATC9K and the monitor off.
2. Connect your ATC9K to your monitor using the HDMI cable.
3. Turn the monitor and ATC9K on.
Playback
1. Select the video or photo you want to play by pressing “Left” and “Right”
button .
2. Press “Play/Pause” button to play.
3. During video playback, press “Play/Pause” ,
to pause or resume playback, press “Left” and
“Right” button to activate fast forward
and fast reverse.
4. To exit to thumbnail view, press “Menu” button .