Oregon Scientific BAR122HGLA - Main Unit Components and Controls; Temperature and Humidity Alarm; Clock and Time Zone Settings

A. FRONT DISPLAY
A four line easy-to-read LCD
Al. WEATHER FORECAST WINDOW
Graphically illustrates the weather forecast
A2. [ SNOOZE / LIGHT ] BUTTON
- Activates LCD backlight for 8 seconds
- Activates the Snooze function when alarm goes off
B. [ t£| ] BATTERY-LOW INDICATOR
Activates when the remote-sensor or main unit battery power is low
C. [f ] RADIO-RECEPTION SIGNAL
Indicates the condition of radio reception
D. [MEMORY] BUTTON
Displays minimum and maximum temperature and humidity
readings and erases memory data
E. [CHANNEL] BUTTON
Toggles between the remote sensor channels
F. [ MODE/SET ] BUTTON
Changes the display mode of the clock and alters time/date setting
G. US - TIME ZONE MAP ICON
Displays Pacific (P), Mountain (M), Eastern (E) or Central
(C) time-zone
H. [ ] ALARM-ON ICON
Appears when the alarm is activated
I. [ ((.)) ] ALARM ICON
Appears when the alarm time is displayed
J. [TIME/ V 1 BUTTON
Decrease the value of a setting
K. [TIME/ a 1 BUTTON
Advances the value of a setting
l. t 24 hr OFF] button
Displays the alarm time or changes the alarm set time
TEMPERATURE & RELATIVE HUMIDITY ALARM :
( for Channel -1 only )
M. [ON/OFF] BUTTON
Enables / disables HI/LO temp alarm and HI/LO % RH alarm
N. [ HI/LO ] BUTTON
- Set the upper or lower temperature and humidity alarm
limits
- Confirms alarm settings
O. [±] BUTTON
Advances the value of the settings for the HI/LO
temperature and humidity alarm
CLOCK:
P. [AL] BUTTON
Enables or disables the daily alarm
Q. [ ZONE ] BUTTON
Toggles between the 4 US time-zones : Pacific, Mountain,
Eastern or Central
R. [ RESET ] BUTTON
Returns all settings to default values
S. WALL-MOUNT HOLE
For mounting the unit on a wall
T. BATTERY COMPARTMENT
Accommodates four (4) UM-3 or “AA” size batteries
U. REMOVABLE TABLE STAND
For standing the main unit on a flat surface
V. ANTENNA FOR RECEPTION OF REMOTE SIGNAL