EN
19
AUDIO BROADCAST
This product can broadcast the current time, indoor
temperature, humidity level and weather forecast. When
activated, the product can tell you this information on
the hour for a specified period of time (such as 6 – 10PM
nightly), or once every 24 hours.
The Audio Broadcast language is selected when you
set the clock (
13).
ACTIVATE AUDIO BROADCAST
Plug in the AC power adapter (it must be plugged in for
the feature to work).
displays in the UVI / Barometric Pressure Area
when Voice Recognition is ON.
To deactivate Audio Broadcast any time, unplug the
AC power adapter.
BROADCAST CURRENT TIME, TEMPERATURE,
HUMIDITY AND WEATHER FORECAST
Press SNOOZE / LIGHT for 2 seconds. Audio Broadcast
must be activated for the feature to work.
SET BROADCAST TIMES
There are 2 Broadcast settings: Hourly during a specified
period of time (such as 6 – 8 PM nightly), or daily at
24 hour intervals.
The AC Adapter must be connected for this
feature.
1. Press SELECT to navigate to the Clock Area.
2. Press and hold MODE for 2 seconds to enter the
clock setting mode.
3. After setting the language, select 1 hour or 24 hour
broadcast mode. Press UP or DOWN to change
settings. Press MODE to confirm.
4. When 1-hour mode is selected, you can set the
start/ end times. Press UP or DOWN to change
settings. Press MODE to confirm.
5. When 24-hour mode is selected, your can set the
start times. Press UP or DOWN to change settings.
Press MODE to confirm.
NOTE
BAR321/323HGN English R3 R 3/27/04, 11:26 AM19
Black
To Next Page
Loading...
