4
GB
HOW TO USE THE PROJECTOR
The projector projects the current time and remote temperature
onto a wall or ceiling.
To project the time-temperature onto a flat surface:
In a darkened room, press [ SNOOZE / LIGHT ], the wall projection
will activate for approximately 5 seconds.
This unit has several features to enhance the clarity of the projected
image.
HINTS FOR BEST OPERATION
• Insert batteries for the remote unit before doing so for the main
unit.
• Set the main and remote unit within range (20 to 30 meters).
• Try different set-ups for best transmission and reception.
• Position the remote unit away from direct sunlight, rain or
snow.
BATTERY INSTALLATION
1. Remove the battery compartment door.
2. Insert two AAA-sized batteries for the remote unit or four AA-
sized batteries for the main unit.
3. Press [RESET].
4. Replace the battery compartment door.
MAIN UNIT
To Next Page
Loading...
