EasyManua.ls Logo

Oregon Scientific BAR338P - How to Use the Projector Power Adapter; How to Use the Backlight; Display Modes

Oregon Scientific BAR338P
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
GB
Projector Features
Feature Effect Instructions
Adjustable Rotates 180° to cast Adjust by turning forwards
Projector image onto any wall or backwards the projector,
so that the projection lens
is pointed in the appropriate
direction
FOCUS Focuses image Rotate knob forwards or
Knob backwards until the image
clarity is optimized
[
] Rotates image on a Turns an image to maintain
IMAGE given surface to an upright position
ROTATION maintain an upright
knob position
180° Horizontally flips Flips an image to maintain
ROTATION an image on a given an upright position
button surface to maintain
an upright position
HOW TO USE THE PROJECTOR
POWER ADAPTER
Your unit comes with a power adapter for using the projector for
extended period of time, such as throughout the night. To install
the adapter,
1. Remove the cover on the bottom of the stand.
2. Plug the adapter into the adapter socket.
3. Connect the power adapter to a wall socket.
4. Slide [PROJECTION ON] to ON.
To turn off the projector, slide the [PROJECTION ON] back. Note
that this switch can only be used with the power adapter installed.
For momentarily projection, use [SNOOZE/LIGHT].
HOW TO USE THE BACKLIGHT
Press the [SNOOZE/LIGHT] button once. The backlight will light
up for five seconds.
DISPLAY MODES
In normal display, the current time, including seconds, will be
displayed. To display the days-of-the-week, press [CLOCK] once.
To switch back to normal time display, press [CLOCK] once.

Related product manuals