EasyManua.ls Logo

Oregon Scientific BAR386 - Temperature and Pressure Trend; Ice Warning; Hi; Lo Temperature Alarm; Moon Phase

Oregon Scientific BAR386
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
8
ICE WARNING
If the channel 1 sensor falls between 3°C to –2°C (37°F
to 28°F), ashes to warn you that the temperature is
approaching freezing.
NOTE The warning will automatically stop if the
temperature goes outside the ice-warning range.
TEMPERATURE AND PRESSURE TREND
The temperature and pressure trend icons are based on
recent sensor readings.
RISING STEADY FALLING
HI / LO TEMPERATURE ALARM
An alert can be set to sound if the sensor set to channel 1
records above or below a temperature of your choice.
MOON PHASE
When calendar is set press or to view the moon
phase for the next/previous day.
Press and hold or to scan through the years
(2001 to 2099).
To end auto-scan:
Press CHANNEL or MEM.
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM for 2 seconds.
To set alarm ON / OFF:
1. Press and hold TEMP HI / LO .
2. Use and to select high / low temperature alarm.
Press TEMP HI / LO to conrm.
3. Press / to set alarm ON / OFF and press TEMP
HI / LO to conrm.
4. If alarm has been activated, use and to select
the temperature.
5. Press TEMP HI / LO to conrm.
To silence the hi / lo temperature alarm:
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature is exceeded again.
Waxing Crescent
New Moon
Waxing Gibbous
First Quarter
Full Moon
Last Quarter
Waning Gibbous
Waning Crescent
P/N: 300100700-00009-10 REV1
10/100

Related product manuals