To Next PageTo Next PageHow to troubleshoot clock issues on my Oregon Scientific BAR826HG Weather Station?
To resolve clock issues on your Oregon Scientific Weather Station, you can try the following: * Adjust the batteries. * Press the RESET button. * Manually activate the radio-controlled clock.
How to fix a non-working remote sensor on my Oregon Scientific Weather Station?
If your Oregon Scientific Weather Station's remote sensor is not working, start by checking the batteries in the sensor unit and replace them if necessary.
How to set up the barometer on my Oregon Scientific BAR826HG?
To configure the barometer on your Oregon Scientific Weather Station, set the altitude and units according to your location and preference.
Why does my Oregon Scientific BAR826HG show 'LLL' or 'HHH'?
If your Oregon Scientific Weather Station displays 'LLL' or 'HHH', it indicates that the temperature is outside of its measurable range.
How to fix Oregon Scientific BAR826HG Weather Station when it cannot auto-synch?
If your Oregon Scientific Weather Station cannot auto-synchronize, try the following steps: 1. Adjust the batteries. 2. Press the RESET button. 3. Manually activate the radio-controlled clock.
What to do if my Oregon Scientific Weather Station shows a strange date or month?
If you are seeing a strange date or month display on your Oregon Scientific Weather Station, try changing the language setting.
How to resolve strange readings on my Oregon Scientific Weather Station?
If your Oregon Scientific Weather Station is showing strange readings, try setting the altitude and unit configurations.
General| Type | Wireless Weather Station |
|---|---|
| Model | BAR826HG |
| Display Type | LCD |
| Weather Data Provided | Temperature, Humidity, Barometric Pressure, Weather Forecast |
| Temperature Measurement Range | -20°C to 60°C (-4°F to 140°F) |
| Barometric Pressure Range | 300 hPa to 1100 hPa |
| Weather Forecast | Yes |
| Wireless Range | Up to 100 meters |
| Power Source | Batteries |
Instructions for inserting batteries into the main and remote units.
Detailed steps for setting up the remote sensor, including channel and signal format.
Steps to set the daily alarm time and activate it.
