the adapter should be disconnected from the main unit.
NOTE The main unit and adapter should not be exposed
to wet
conditions. No objects filled with liquid, such as
vases, should be placed on the main unit and adapter.
INSERT BATTERIES
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities (see FIG 2).
3. Press RESET after each battery change.
indicates batteries are low.
NOTE Batteries should not be exposed to excessive
heat such as sunshine or fire.
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its clock
automatically with a clock signal.
BARM839:
Slide EU / UK to select the signal received.
• EU:
DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK:
MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
BARM839A:
• WWVB-60 signal: within 3200km (2000 miles) of Fort
Collins
Colorado. Manually set clock to select time
zone (Pacific, Mountain, Central or Eastern).
To enable / disable signal reception:
Press and hold VOL + to enable or VOL - to disable
signal reception.
NOTE Reception
takes
2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.
Clock signal reception indicator:
STRONG SIGNAL WEAK SIGNAL NO SIGNAL
MANUALLY SET CLOCK
1. Press and hold MODE.
2. Press VOL + or VOL - to change the settings.
3. Press
MODE to confirm.
4. T
he settings order is: time zone, 12/24 hr format,
hour, minute, year, calendar mode (day-month /
month-day), month, day and language.
BARM839:
T
ime zone offset sets the clock +/- 23 hours
from the received clock signal time.
To Next Page
Loading...
