M
Mrs. Gabriela Hughes PhDJul 30, 2025
What to do if my Oregon Scientific BPW813 Blood Pressure Monitor shows an error message?
- JJacob CampbellJul 30, 2025
If your Oregon Scientific Blood Pressure Monitor displays an error message, it could be due to a measurement or calibration error. In this case, retake the measurement. If the problem continues, you may need to seek assistance from the retailer or customer service. Other potential causes include an unsecure wrist cuff, motion detected during measurement, a clock that needs resetting after battery replacement, pressure exceeding 37.3 kPa (280 mmHg), a measurement unit that needs resetting after battery replacement, or a deflation period that was too long. Reset the clock or the measurement unit if needed.