EN
11
TROUBLESHOOTING
Problem Solution
My Weather
+
is not working.
• Make sure the battery is correctly inserted. Follow the pairing instructions
correctly.
• Press
to reset the device to default, then pair with the smart device
again.
I cannot pair the Weather
+
with my smart device.
Check if the Weather
+
and your smart device are in 30 m (98 ft) Bluetooth
operation range. Place your smart device closer if there are physical
obstacles such as a thick wall or large pieces of furniture interfering with
the transmission.
I cannot retrieve all data from
the Weather
+
.
Weather
+
stores the weather data up to 20 days. If your smart device
disconnects from the Weather
+
for more than 20 days, the app could only
retrieve the data from the last 20 days. Make sure you keep your smart
device connected to the Weather
+
in order to receive the data.
The live data does not refresh
when I press
.
• It may take a few seconds for the live data to show on the app.
• If you have pressed
once, wait for 15 seconds before pressing again.
• Check if the Weather
+
and your smart device are in 30 m (98 ft) Bluetooth
operation range. If not, place your smart device closer.
• If you have already installed more than 1 Weather
+
, place each device as
far as possible from each other to avoid interference.
When I press
, it shows
a circle with percentage ,
what does it mean?
• It may take several minutes for the smart device to load the existing
weather data history.
• The process will be interrupted if you exit from the app. Please wait until
SPECIFICATION
L x W x H 70 x 70 x 20 mm (2.76 x 2.76 x 0.79 in)
Weight 58g (2.05 oz)
Operating range -20°C – 60°C (-4°F – 140 °F)
Weather display Sunny/Partly Cloudy/Cloudy/Rainy/Snowy
Temperature resolution 0.1°C (0.2°F)
RF Transmission Range Bluetooth: 30 m (98 ft)
Relative Humidity Range 25% to 95%
Pressure range Barometric: 300-1200 hPa
Device memory 20-day data logger
App memory Historical data logger (Daily/Weekly/Monthly/Yearly)
Power 2 x UM-4 (AAA)
To Next Page
Loading...
