EN
5
10. Your smart device might take several minutes after setup to download data.
NOTE
• The pairing mode of the Weather
+
turns off after 30 seconds.
• Bluetooth wireless technology operates within 30 meters (98 ft) range and varies if there are physical obstacles,
such as a thick wall in between your smart device and Weather
+
.
• Once the pairing is successful, the Weather
+
connects with the smart device automatically when the Bluetooth
on your smart device is turned on, or it moves within range of the base.
• The room type preset values are for reference only. Actual conditions may vary.
• If you unpair/remove a device from the app, the data stored for certain device in the app will be removed.
For the best results:
• Place the sensor out of direct sunlight and moisture.
• Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.
• To ensure your device syncs and stores the data, Open the Weather
+
apps and press to reconnect the
device after each reset or battery replacement.
PLACEMENT OF WEATHER
+
Weather
+
Method Instruction
Table Stand
Place the Weather
+
on a flat surface.
Wall Mount
Attach the Weather
+
unit to the wall using the wall mount hole at the back.
NOTE
If you are installing more than one Weather
+
, place the device as far as possible from each other to avoid
interference.
To Next Page
Loading...
