Oregon Scientific EM913R - How to Recall; Clear the Stored Temperature and Humidity Memories

3
GB
Note :
The ‘IN’ indicator will be displayed whenever the temperature
display relates to indoor temperature and the ‘OUT’ indicator will
be displayed whenever the temperature display relates to outdoor
temperature.
1. Remove the protecting cap from the sensing port.
2. Plug the external probe into the sensor jack and push the [IN /
OUT] button to toggle to the outdoor display. The ‘OUT’
indicator appears from outdoor to indoor.
Push the [IN / OUT] button once to toggle the reading to the indoor
display. The ‘IN’ indicator is displayed.
(It’s up to end user’s desire to remove or keep the external sensor
probe to the main unit.)
HOW TO RECALL / CLEAR THE STORED
TEMPERATURE AND HUMIDITY
MEMORIES
The Thermo-Hygrometer will automatically record the maximum /
minimum temperature and relative humidity reading. You can recall
/ clear those reading as follows:
Maximum Button to press Displays
Current
temperature/
humidity
23°C
68%
Recall the
maximum
temperature/
humidity
Press [MAX]
button once
MAX 28
°C
MAX 78 %
(“MAX”indicator,
maximumtemperature
and humidity displayed)
In case, clear
the maximum
temperature /
humidity
Press [MEMORY
CLEAR] button
once
MAX 23
°C
MAX 68 %
(display update as the
current temperature and
humidity reading)
Return to
current
temperature /
humidity
Press [MAX]
button once again,
while at maximum
temperature and
humidity display
(“MAX” indicator
disappear)
23
°C
68 %
TEMPERATURE
HUMIDITY
IN/OUT MIN MAX
COMFORT
IN