Oregon Scientific EM913R - How to Read the Relative Humidity and Comfort Indicators

4
GB
HOW TO READ THE RELATIVE
HUMIDITY AND COMFORT INDICATORS
The unit shows the indoor relative humidity and such reading is
temperature compensated. At the same time , the comfort indicators
– COMFORT, WET or DAY will tell you if the current indoor
environment is comfortable, too wet or too dry. The comfort
indicators will appear on the display when the following conditions
are satisfied :
You may like to clear the memory occasionally, so to record the
maximum / minimum at a specified period.
Minimum Button to press Displays
Current
temperature /
humidity
23°C
68 %
Recall the
minimum
temperature/
humidity
Press [MIN]
button once.
MIN 18 °C
MIN 58 %
(“MIN” indicator,
minimum temperature
and humidity displayed)
In case, clear
the minimum
temperature /
humidity
Press [MEMORY
CLEAR] button
once
MIN 23 °C
MIN 68 %
(display update as the
current temperature
and humidity)
Return to
current
temperature /
humidity
Press [MIN]
button once again,
while at minimum
temperature and
humidity display
23 °C
68 %
(“MIN” indicator
disappear)
Indicator
Displays
on the unit
Temperature
Range
(indoor)
Humidity
Range
Shows that the
Current indoor
Environment
COMFORT 20°C to 25°C
(68 °F to 77°F)
40% RH to
70%RH
Idea range for
both relative
humidity and
temperature
WET
DRY
Full Range
Over
70% RH
Below
40% RH
Contain excess
moisture
Contain
inadequate
moisture
No Indicator
Below 20°C
(68 °F) or
Higher than
25°C (77 °F)
40%RH to
70%RH
No comment