1. SNOOZE / LIGHT: activate snooze alarm; turn on
backlight / projector; flip projected image 180º
2. Projector
3. : clock signal reception indicator
4. : adapter disconnected
5. : alarm time is displayed
6. : remote sensor reception indicator
7. : indoor temperature is displayed
8. : daily alarm is ON
9. AM/PM
10. Calendar format
11. +ZONE: time zone offset
BACK VIEW
1. ºC / ºF: select temperature unit
2. / : increase / decrease value of the setting;
activate / deactivate clock reception signal
3. ON·PROJECTION·OFF: enable / disable
continuous projection
4. : view alarm status; set alarm; activate / deactivate
alarm function
5. BACKLIGHT·HI·OFF·LO: enable / disable continuous
backlight; select brightness
6. MODE: set clock
7. TEMP: toggle between indoor / outdoor temperature
display; initiate auto-toggle
8. RESET: reset unit to default settings
To Next Page
Loading...
Need help?
General
