How to fix no display on Oregon Scientific RM806 Clock?
If your Oregon Scientific Clock has no display, first check the battery compartment. Next, confirm that the batteries are of good quality and are installed correctly. Also, be certain that the plastic protective tabs have been removed.
What to do if my Oregon Scientific RM806 did not receive a time signal?
If your Oregon Scientific Clock doesn't receive a time signal, especially when new, allow 60-72 hours for it to automatically seek a signal between midnight and 4 a.m. Interference can also be a factor; try relocating the clock or antenna near a window. Also, ensure the antenna cord is fully extended and check for a low battery indicator.
Why does my Oregon Scientific RM806 Clock keep losing the signal?
If you're experiencing a loss of signal on your Oregon Scientific Clock, interference might be the cause. Try moving the clock or antenna to a new location. The ExactSetTM feature ensures accuracy between signals using a high-quality clock mechanism.
General| Type | Projection Clock |
|---|---|
| Display | LCD |
| Alarm Function | Yes |
| Snooze Function | Yes |
| Backlight | Yes |
| Power Source | AC Adapter |
| Time Format | 12/24 Hour |
| Date Display | Yes |
| Atomic Time Sync | Yes |
| Indoor/Outdoor Temperature | Indoor only |
| Features | Automatic time synchronization |
| Temperature Display | Indoor temperature |
| Backup Battery Type | AAA |
| Wireless Signal Reception | Yes |
| Projection | Time and temperature |
| Weight | 0.5 lbs |
Activates the backlight and the snooze function.
Used for manual setting of time, alarm, or calendar functions.
Adjusts time signal to the user selected North American time zone.
Turns the alarm function on and off.
Switches display between Day of Week or Seconds.
Shows alarm time and allows switching to month/date display.
Explains indicators for signal reception quality.
Shows hours, minutes, seconds, or day of the week.
Represents the four optional time-zone settings.
Shows month and date, can switch to alarm time.
Icon indicating the display shows Alarm Time.
Bell icon indicating alarm function is activated.
Icon indicating it is time to change batteries.
Resets settings to default values.
Instructions for installing the device batteries.
Explains automatic synchronization process and signal reception.
Step-by-step instructions for setting the alarm time.
Procedures to activate or deactivate the alarm function.
Manual procedures to set time, year, month, date, and language.
Lists common problems and their solutions.
Specifications and technical details of the device.
FCC compliance information and warnings.
Contact information for product support.
Details about the product warranty.
To Next Page