Oregon Scientific RRM116 - Setting and Operating Alarms; Setting the Clock Time and Date; Configuring Alarm 1 and Alarm 2

SETTING CLOCK TIME
1. Press and hold for 2 seconds to enter the time setting mode.
2. Press or repeatedly to adjust settings; press and hold or to quickly
setting.
3. Press to confirm and go to the next setting.
- The setting order is Time zone (+/- 24) > 12/24 hour format >
Hour>minute>year>calendar format (MD/DM)> month> day> Weekday language.
- Complete each step within 20 seconds or the clock radio will exit the clock setting
mode.
- In clock setting mode, press and hold for 2 seconds to exit the setting mode.
- The language options are English (ENG), German (GER), French (FRE), Italian (ITA),
and Spanish (SPA).
SETTING ALARMS
1. Press and hold for 2 seconds to enter alarm setting mode. The clock digits flash.
2. Press or repeatedly to adjust settings; press and hold or to quickly
setting.
3. Press to confirm and go to the next setting.
- The setting order is Alarm 1 time setting > Alarm 1 radio alarm ON/OFF > Alarm 1 radio
channel > Alarm 1 radio volume > Alarm 1 radio snooze time setting
(15/30/60/90mins/OFF) > Alarm 2 time setting > Alarm 2 radio alarm ON/OFF > Alarm 2
radio channel > Alarm 2 radio volume > Radio off time setting (15/30/60/90
minutes/OFF).