Oregon Scientific RRM116 - Alarm Activation and Snooze Function; Radio Functionality; Storing and Selecting FM Radio Stations

Activating/Deactivating the alarm
Press accordingly for desired option:
Time pressing
Alarm on/off
Operation
1
Alarm 1 on
Set Alarm 1
2
Alarm 2 on
Set Alarm 2
3
Both alarms on
Set Alarm 1 and 2
4
Both alarms off
Set Alarm 1 and 2
If the alarm radio function is off, the alarm will default to the buzzer sound.
Snooze /Stop the alarm
- When the alarm sounds, the backlight will be on for 10 seconds. Press SNOOZE to stop
the alarm for 8 minutes. The alarm indicator will flash.
- When the alarm sounds, double press SNOOZE to stop the alarm for 24 hours.
RADIO FUNCTION
Storing the preset FM station
You can store up to 8 preset FM stations.
After each battery replacement or reset, for the first time press , the clock will store 8
FM radio channels automatically.
Manually store the channels:
1. Press and hold the to enter the radio setting mode.
2. Press or to select a channel. Press to confirm.
3. Press or to select a frequency. Press and hold or for more than 1
second to automatically tune to a higher or lower frequency. Tuning automatically stops
when it detects a station signal.