EN
BACKLIGHT
Press SNOOZE/LIGHT to illuminate the backlight for 5
seconds.
CONTINUOUS BACKLIGHT
The AC power adapter must be plugged in to use this
feature (→ 8).
1. The BACKLIGHT switch is located in the battery
compartment. Move it to the “ON” position to
enable the continuous backlight. Move it to the
“OFF” position to disable.
2. Move it to the “AUTO” position to enable
continuous backlight controlled by light intensity.
When activated, the backlight will be on
whenever the unit perceives that the room is dark.
3. The Light Sensitivity knob is located in the
battery compartment. Rotate to adjust.
4. When activated, the continuous backlight will be
half as bright as usual. To achieve full brightness,
press SNOOZE/LIGHT.
19
PS-L03_GB-final.p65 8/8/03, 12:15 PM21
To Next Page
Loading...
