Oregon Scientific S+ARCK PS-L03 - Remote Unit and Clock Sync Issues; Barometer and Clock Settings

EN
Problem Symptom Remedy
Cannot
change
clock
Disable auto-
synchronization
(→ 10)
Baro
Strange
reading
Set altitude / unit
(→ 14)
22
Cannot
change
channel
Check sensors.
Only one sensor is
working (→ 15 )
Problem Symptom Remedy
Clock
Cannot
auto-
synchronize
1. Remove batteries.
2. Press RESET. All
memory items will
return to default.
3. Replace batteries.
Remote
unit
Cannot
locate
remote unit
Check batteries
(→ 8)
Check location
(→ 9)
4. Place clock near
window / away
from electrical
devices, and wait
10 – 20 minutes.
If it still fails, you may
be too far from a
signal.
PS-L03_GB-final.p65 8/8/03, 12:15 PM24