TEMPERATURE & HUMIDITY SENSOR
RAIN GAUGE
ACCESSORIES - SENSORS
This product can work with up to 3 sensors at any one
time to capture outdoor temperature, relative humidity or
UV readings in various locations.
Optional wireless remote sensors such as those
listed below can be purchased separately. For more
information, please contact your local retailer.*
• Solar Panel STC800 connectable to Wind Sensor and
Temperature / humidity sensor
• Thermo-hygro THGR221 (3-Ch)
• UV UVN800
* Features and accessories will not be available in
all countries.
2 x AA UM-3
1.5V batteries
4 x Screws
(Type B)
1 x Rain Collector
OVERVIEW
FRONT VIEW
1. MODE: Switch between the different display modes
/ settings; set clock; set altitude; activate autoscan
2. MAX/MIN: Read the max / min memory readings;
clear readings
3. SELECT: Switch between the different areas
4. LIGHT: Activate backlight
5. / : Increase / decrease values of the selected
setting; toggle between outdoor channels
BACK VIEW
1
2
4
3
5
6
1. RESET: Returns unit to default settings
2. UNIT: Select unit of measurement
3. SEARCH: Searches for sensors or for the radio-
controlled clock signal
6 x Washers
2 x AAA UM-4
1.5V battery
1 x Temperature /
Humidity Sensor
WMR86NSX_IM_EN R10.indd 2 2018/9/20 上午11:52
To Next Page
Loading...
