520-120
4
© Blount, Inc. Pricing and specifications subject to change without notice. All rights reserved.
OREGON® is a registered trademark of Blount, Inc. in the United States and/or in other countries.
TABLE OF CONTENTS
Table of Contents
NAMES AND TERMS ...................................................................... 5
SYMBOLS AND LABELS ...................................................................5
SAFETY INFORMATION ...................................................................6
SAFETY RULES AND PRECAUTIONS ............................................................6
SETTING UP THE GRINDER .....................................................................8
ELECTRICAL CONNECTION ....................................................................8
GROUNDING INSTRUCTIONS ..................................................................8
GENERAL INFORMATION ......................................................................9
USING AND KEEPING THE OPERATOR’S MANUAL ...............................................9
SAFETY DEVICES ..............................................................................9
INTENDED USE ................................................................................9
TECHNICAL DATA .............................................................................9
PART DESCRIPTION .....................................................................11
GRINDING ANGLES CHART ..............................................................12
INSTRUMENTAL MEASUREMENTS ........................................................12
MOUNTING THE BASE UNIT – BENCH ........................................................ 13
MOUNTING THE BASE UNIT – WALL .......................................................... 13
ASSEMBLY .................................................................................. 14
CHOOSING AND INSTALLING THE GRINDING WHEEL ......................................... 14
CENTERING THE GRINDING WHEEL BY POSITIONING THE VISE ASSEMBLY ..................... 17
SETTING THE SHARPENING ANGLES .....................................................19
FOR RIGHT HAND CUTTERS WITHOUT A DOWN ANGLE (0°) ................................... 20
FOR RIGHT HAND CUTTERS WITH A DOWN ANGLE ........................................... 21
FOR LEFT HAND CUTTERS WITHOUT A DOWN ANGLE (0°) .................................... 23
FOR LEFT HAND CUTTERS WITH A DOWN ANGLE ............................................ 24
PLACING THE CHAIN IN THE VISE .........................................................26
OPERATING INSTRUCTIONS .............................................................28
SHARPENING THE CHAIN .................................................................... 28
GRINDING WHEEL DRESSING FOR SETTING THE DEPTH GAUGE ...............................30
SETTING THE DEPTH GAUGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
STOPPING AND SHUTTING DOWN .......................................................33
MAINTENANCE AND CLEANING .......................................................... 33
DEMOLITION AND DISPOSAL ............................................................33
WARRANTY
THE OREGON® CUSTOMER-SATISFACTION POLICY / LIMITED WARRANTY ...................... 34
TROUBLESHOOTING ....................................................................35
ILLUSTRATED PARTS LIST ...............................................................36
To Next Page
Loading...
