13
Lawn Mower Model LM300
Safety Rules and Operation
Maintenance
Maintenance
• Always wear gardening gloves when
handling or working near the sharp blades.
• Always Remove the battery and safety key
from the machine when preforming any
cleaning or maintenance.
• Keep all nuts, bolts and screws tight to be sure
that the machine is in safe working condition.
• Check the grass catcher frequently for wear or
deterioration.
• Examine the machine and replace worn or
damaged parts for safety.
• Only the accessories and attachments that are
on the lawn mower are acceptable for the use of
the lawn mower.
• Ensure that all replacement or service parts are
approved by the manufacturer.
• Use identical replacement blades only. Use
of any other accessory or attachment might
increase the risk of injury.
• Be careful during adjustment of the machine
to prevent entrapment of the fingers between
moving blade and fixed parts of the machine
• Always allow the machine to cool down before
storing
• When servicing the blades be aware that, even
though the power source is switched off, the
blade can still be moved.
• Store idle lawn mower indoors. When not in use,
lawn mower should be stored in an indoor dry
and locked-up place – out of reach of children.
• Maintain lawn mower with care – keep cutting
edges sharp and clean for best and safest
performance.
• Follow instructions for lubricating and changing
accessories.
• Keeps handles dry, clean, and free from oil and
grease.
Recommendations for optimal handling of the
battery and charger
• Ensure the switch is in the off position
before inserting battery pack. Inserting the
battery pack into machines that have the switch
on invites accidents.
• Do not charge battery in rain, or in wet
locations.
• Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
• Recharge battery only with the charger
specified by the manufacturer (chargers
Oregon C series). A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
• Do not charge other batteries on the charger.
The battery charger is suitable only for charging
manufacturer specific and approved lithium
ion batteries within the listed voltage range.
Otherwise there is danger of fire and explosion.
• Keep the battery charger clean. Contamination
can lead to danger of an electric shock.
• Before each use, check the battery charger, cable
and plug. If damage is detected, do not use the
battery charger. Never open the battery charger
yourself. Have repairs performed only by a
qualified technician and only using original spare
parts. Damaged battery chargers, cables and
plugs increase the risk of an electric shock.
• Do not operate the battery charger on easily
inflammable surfaces (e.g., paper, textiles,
etc.) or surroundings. The heating of the
battery charger during the charging process can
pose a fire hazard.
• Use only appropriate battery packs intended
specifically by the manufacturer for the
machine. Use only the Oregon nominal V B
series batteries. Use of any other battery packs
may create a risk of injury and fire.
To Next Page
Loading...