What does it mean when my Oregon Blower has 4 green and 1 red continuous lights?
If your Oregon Blower displays 4 green and 1 red continuous lights, it indicates a failed dashboard. Replace the dashboard.
What to do if my Oregon Professional Trimmer shows 1 continuous red light?
If you see one continuous red light on your Oregon Trimmer, it indicates that the cutting head is jammed. Disconnect the battery plug from the tool and remove any obstructions from the cutting head.
What does it mean if my Oregon Professional has 1 slow blinking red light?
A slow blinking red light on your Oregon Trimmer indicates that the battery is fully discharged. You will need to charge the battery.
What to do if my Oregon Trimmer shows 2 short, 1 long blinking red light?
If your Oregon Trimmer is showing 2 short, 1 long blinking red light, it means the tool is overheating. Allow the tool to cool down and check for any blocked vents that may be restricting airflow.
What does it mean if my Oregon Professional has alternating green and red lights?
Alternating green and red lights on your Oregon Trimmer indicate a battery fault. Try using a different battery.
What to do if my Oregon Blower has 5 blinking green lights?
If your Oregon Blower shows 5 blinking green lights, it means the trigger was pulled or the trigger lock was in the "ON" position when the battery plug was inserted. To fix this, release the trigger or move the trigger lock to the "OFF" position. Unplug the tool, check for a stuck trigger, and then plug the tool back in.
Why Oregon Camera Accessories blink 1 short, 1 long red?
If the Oregon Camera Accessories battery internal temperature is too hot or too cold, the device will show 1 short, 1 long red blink. You should remove the battery and allow it to return to a proper operating temperature before using it with the tool again. Before charging, place the battery in an environment that meets the recommended charge temperatures.
Why won't my Oregon Blower start?
If your Oregon Blower doesn't start, make sure you're pulling the trigger. Also, check that the plug is fully inserted into the socket to ensure it has power.
What does it mean if my Oregon Professional shows alternating green and red lights?
This indicates a battery fault. Try using a different battery.
What to do if my Oregon Professional Trimmer battery is fully discharged?
Charge the battery.
General| Power Source | Gasoline |
|---|---|
| Engine Displacement | 25.4 cc |
| Cutting Width | 17 inches |
| Shaft Type | Straight |
| Type | Trimmer |
| Engine Type | 2-stroke |
To Next Page
