Oregon Professional Series User Manual (English)

Other manuals for Oregon Professional Series

Questions and Answers:

P
Paul WatsonSep 6, 2025
What to do if Oregon Camera Accessories have alternating red and green LEDs?
- G
  Gloria LambertSep 6, 2025
  If your Oregon Camera Accessories display alternating red and green LEDs, it indicates that too much current is being drawn from the battery or another fault has occurred. Here's what you can do: * Disconnect the battery from the tool, wait 15 seconds, and then reconnect it. * Try using a different battery to see if the issue persists. * Consider replacing the tool or power cord. If the problem continues, contact an Oregon dealer or representative for further assistance.
B
Bryan ThompsonSep 5, 2025
What to do if Oregon Camera Accessories show constant red LED blink?
- W
  wallerjessicaSep 5, 2025
  If the Oregon Camera Accessories battery has very low voltage, the red LED will blink constantly. To resolve this, plug the battery into a charger as soon as possible.
C
Christine SmithSep 4, 2025
What to do if my Oregon Professional Trimmer shows 5 blinking green lights?
- C
  Christopher McdanielSep 5, 2025
  Release the trigger. Unplug the tool. Check if the trigger is stuck and then plug in the tool.
K
Kristy NorrisAug 23, 2025
Why are the LEDs not lighting up on my Oregon Professional?
- M
  Michelle MorganAug 23, 2025
  If the LEDs on your Oregon Trimmer aren't lighting up, there could be a couple of reasons. First, make sure you are pulling the trigger. Also, ensure the trimmer is receiving power by checking that the plug is fully seated in the socket.
J
Joseph LewisSep 3, 2025
What to do if my Oregon Trimmer shows 1 short, 1 long blinking red light?
- K
  Kenneth CarterSep 3, 2025
  This indicates the battery is too hot. Try using a different battery and allow the overheated battery to cool down.
D
Diana MorganSep 2, 2025
What does it mean if my Oregon Professional shows alternating green and red lights?
- R
  Robert HowardSep 2, 2025
  This indicates a battery fault. Try using a different battery.
L
Lisa BatesSep 1, 2025
What to do if my Oregon Professional cutting head is jammed?
- J
  Jesse ShepherdSep 1, 2025
  Disconnect the battery plug from the tool and remove any obstruction from the cutting head.
A
austinjessicaAug 31, 2025
What to do if my Oregon Professional Trimmer battery is fully discharged?
- T
  Teresa WintersAug 31, 2025
  Charge the battery.
L
lauriemarshallAug 30, 2025
What to do if my Oregon Professional shows 4 green, 1 red, 1 blue quick blinking lights?
- G
  ghallAug 30, 2025
  If your Oregon Trimmer is showing 4 green, 1 red, and 1 blue quick blinking lights, it indicates a hardware fault. Unplug the tool, wait 30 seconds, and then plug it back in.
W
williamsbarbaraAug 29, 2025
What does it mean if my Oregon Professional Trimmer has 4 green and 1 red continuous lights?
- T
  Terri BarnettAug 29, 2025
  If your Oregon Trimmer displays 4 green and 1 red continuous lights, it indicates a failed dashboard. The dashboard needs to be replaced.