Oricom UHF2190 - Setting the Repeater function

21
Important
• Speechtransmissionsarenotallowedonchannel22and23
(Receive only)
• CTCSSandCallringtonecallingisdisabledonchannel5and35.
• Callringtonecallingisonlyallowedtooperateforamaximum
of 3 seconds and it is only possible to operate once in any 60
second period.
Receive Channel 1 2 3 4 5* 6 7 8
Transmit channel 31 32 33 34 35* 36 37 38
Receive Channel 41 42 43 44 45 46 47 48
Transmit channel 71 72 73 74 75 76 77 78
* Channel 5 is emergency channel only
Channel 2
Channel 32
Channel 2
Channel 32
Repeater Station
Setting the Repeater function
a. Select your repeater channel to suit the repeater station
you wish to access (Channels 1 – 8 and 41 – 48).
b. Press the Menu button 13 times, “RPT” icon will be
displayed and ashing on the LCD screen.
c. Press the UP or DOWN button to set the Repeat function
to On or Off.
d.PressthePTTbuttontoconrmyoursetting.
Operation
OR011253 UHF2190_2195 User Guide_11-07-14.indd 21 2014/11/7 14:31:12