Oricom UHF2190 - Duplex operation via Repeaters; Turning on;off Duplex on channels

20
e. Continue pressing the MENU button to change the DCS code.
f. Press the UP or DOWN button to select the desired DCS
code (1-83)
g.PressthePTTbuttontoconrmyoursetting.
Duplex operation via Repeaters
This feature allows to use local repeater stations that are designed
to automatically re-transmit your broadcast over a large area thus
giving you increased range.
Repeaters stations are privately operated radio systems installed
throughout Australia.
For example, if you wish to access a repeater station in your area
which operates on channel 2 you only need to set the Duplex
access on this Channel.
So, if you are in the range of a local repeater which transmits on
channel 2, after setting your radio to allow access of the repeater
on that channel, you will select channel 2 as normal, but during
transmit operation your radio will automatically transmit to the
repeater on channel 32.
Turning on/off Duplex on channels
a. Select the required channel to suit the repeater station you wish
to access (Channels 1 – 8 and 41 – 48)
b. Press the Menu button twice, “RPT” icon will display
c. Press the UP or DOWN button to set the Duplex function to On
or Off.
d.PressthePTTbuttontoconrmyoursetting.
e. The RPT icon will display to indicate that Duplex is set on that
channel.
Operation
OR011253 UHF2190_2195 User Guide_11-07-14.indd 20 2014/11/7 14:31:11