Oricom UHF2190 - Setting the Roger Beep; Setting the Key Tone ON or OFF; Setting the Dual Watch Mode

19
Setting the Roger Beep
The Roger beep is a tone which is automatically transmitted
whenever the PTT button is released. This alerts the receiving party
to inform you that you have intentionally ended the transmission,
and you are now in receive mode.
a. Press the MENU button 10 times, the “ON” icon will ash
on the LCD Screen.
b. Press the UP or DOWN button to select the Roger beep
On/Off.
c. Press the PTTbuttontoconrmyoursetting.
Setting the Key Tone ON or OFF
Thisfeatureallowsyourradiounittoemitaconrmationtoneafter
pressing each button.
a. Press the MENU button 11 times, the “ON” icon is
ashing on the LCD Screen.
b. Press the UP or DOWN button to select Key tone On/Off.
c. Press the PTT buttontoconrmyoursetting.
Setting the Dual Watch Mode
Your radio is capable of monitoring two channels, the current and
another (dual watch) channel. If the unit detects a signal on either
channel, it will stop and receive the signal.
a. Press the MENU button 12 times, “DCM” icon will be
displayed while “OFF ” ashes on the LCD Screen.
b. Press the UP or DOWN button to select the Dual Watch
channel (1-80, except the current channel).
c. Continue pressing the MENU button to change the
CTCSS code.
d. Press the UP or DOWN button to select the desired
CTCSS code (1-38)
Operation
OR011253 UHF2190_2195 User Guide_11-07-14.indd 19 2014/11/7 14:31:11