Oricom UHF2190 - Call-Ring tone; Selecting a Call- Ring tone; Activating the Vibrator mode

18
Call-Ring tone
You can send a Call-ring tone to other radio users to give
an alert that you want to communicate with them.
Press the CALL button
You will hear a ring tone for about two seconds; “TX” icon
appears on the LCD screen. Any other units within the
transmitting range and tuned to the same channel and sub-
channel (if applicable) will hear the Call-ring tone.
Selecting a Call- Ring tone
Your UHF2190/2195 is equipped with 15 different types of Call-
Ring tones.
a. Press the MENU button 8 times, the “C01” icon will
display and ash on the LCD Screen.
b. Press the UP or DOWN button to select the desired
Call-ring tone. A respective Call- Ring tone sound will be
played when changing from one tone to another.
c. Press the PTTbuttontoconrmyoursetting.
Activating the Vibrator mode
a. Press the MENU button 9 times; “1” ashes on the LCD
Screen.
b. Press the UP or DOWN button to activate the vibrator
function.
c. Press the PTTbuttontoconrmyoursetting.
Note: Vibrator and Call tone can be activated at the same.
Operation
OR011253 UHF2190_2195 User Guide_11-07-14.indd 18 2014/11/7 14:31:11