Oricom UHF2390 User Manual

22
Operation
To select a call tone
Press the MENU key 6 times, the LCD will display the icon
and call the tone number will ash.
Press
▲
or
▼
key to select your desired call tone.
Press the PTT key to conrm and quit or press MENU to
continue next menu setting.
VIBRATE MODE
The unit will vibrate to alert you when it receives a Call or radio
voice signal from other UHF2390 radios.
Press MENU key 7 times, the LCD will display “
”.
Press
▲
or
▼
key to turn the vibrator on or off.
After turning on the function, LCD will display
icon.
Press PTT to conrm and quit or press MENU to continue next
menu setting.
Note: Call tone and Vibrate can be activated at the same time.
While the unit is in standby mode for over 30 seconds, it will
vibrate 1 time upon receiving a voice signal.
Key Tone
This feature allows the radio to emit a conrmation tone after
pressing each button.
Press MENU key 8 times, LCD display “t o”.
Press
▲
or
▼
key to select the Key Tone On/Off.
Press PTT to conrm and quit or press MENU to continue next
menu setting.

Oricom UHF2390 Specifications

General

Brand	Oricom
Model	UHF2390
Category	Two-Way Radio
Language	English