24
Operation
Duplex operation via Repeaters
This feature allows you to use local repeater stations that are
designed to automatically re-transmit your broadcast over a
large area thus giving you increased range.
Repeater stations are privately operated radio systems installed
throughout Australia.
For example, if you wish to access a repeater station in your
area which operates on channel 2, you need to set the Duplex
access on this Channel.
When you have turned on the Duplex setting in the menu
for the selected channel (and you are within range of a local
repeater), your radio will automatically transmit to the repeater
on channel 32.
Turning on/off Duplex on channels
a. Select the required channel to suit the repeater station you
wish to access (Channels 1~8 and 41 ~ 48)
b. Press the MENU key once, “RPT” icon will display.
c. Press the Up or Down key to set the Repeater function to ON
or OFF.
d. Press the PTT key to conrm your setting.
e. The RPT icon will display to indicate that Repeater function is
set on that channel.
To Next Page
Loading...
Need help?
General
