Orient GNA - Accumulated Elapsed Time Measurement; Cumulative Time Measurement Steps; OPERATING THE TACHYMETER; Tachymeter Operation Steps

5
■ Accumulated elapsed time measurement
Restarting and stopping the stopwatch can
be repeated by pressing button A.
Button A
START
Button A
STOP
Button A
RESTART
Button B
RESET
Button A
STOP
* When button B is pressed, the stopwatch will be reset even during time
measurement.
◆ OPERATING THE TACHYMETER
The tachymeter is a function that measures the time required to pass through a
certain distance (1 km) and fi nd the average hourly speed. It can also fi nd perfor-
mance per unit time (one hour).
* The measurement time of the tachymeter is limited to one minute or less. Please
note that if the measurement time exceeds one minute, it will not be possible
to read the average hourly speed or performance per hour.
Button A
1 Press button A simultaneously with the start (or with the
start of product fabrication).
Button A
2 Press button A simultaneously with reaching the 1 km
point (or with the end of product fabrication).