FEATURES
This is a multi-display analogue watch featuring a stopwatch and alarm
function.
It is a very convenient multi-function watch.
• The current time is indicated by the hour and minute hands and a small
second hand.
• The alarm can be set in 1-minute increments to a time up to 11 hours and
59 minutes in advance.
• The stopwatch can measure up to 60 minutes in 1/5 second increments.
The time measured is indicated by the two stopwatch hands (stopwatch
second and minute hands). Split time measurement is also available.
After 12 hours, the stopwatch will automatically stop.
SPECIFICATIONS
(1) Crystal oscillator frequency: 32,768 Hz (Hz = Oscillations per second)
(2) Wrist-worn accuracy: (at normal temperature <5°C ~ 35°C>)
Mean monthly rate: ±20sec.
Alarm accuracy: ± 1 minute
(3) Operating temperature range: –5°C ~ +50°C
(4) Drive system: Step motor (4 pieces)
(5) Display system:
[Time function]
Hour and minute hands with a small second hand that moves at one-
second intervals.
[Stopwatch function]
Stopwatch minute hand turns a full circle in 60 minutes at one-minute
intervals.
Stopwatch second hand turns a full circle in 60 seconds at 1/5 second
intervals.
[Alarm function]
Alarm minute hand turns a full circle in 60 minutes at one-minute intervals.
Alarm hour hand turns a full circle in 12 hours while moving correspondingly
with the alarm minute hand.
(6) Additional functions: Reset switch, second hand halt mechanism,
accumulated time measurement, split time measurement, power reserve
indicator feature
To Next Page
Loading...
