7
G
H
AA
PREPARATION
ASSEMBLY INSTRUCTIONS
1. Attach the tank bracket (H) to the angle
bracket (G) using two screws (AA). Tighten
with a Phillips Screwdriver.
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 10 minutes
Tools Required for Assembly: Phillips screwdriver (not included).
EE
Hardware Used
AA
M4x10 mm Screw
x 2
1
G
H
AA
To Next Page
Loading...
Need help?
General
