12
360° Aimable
Mid-Range & Tweeter
The midrange and tweeter can be pivoted to direct the sound towards the listen-
ing area. Or for a more diused surround sound experience, the rear speakers can
be aimed towards the wall. To aim the tweeter, gently apply pressure to the rim
with your thumbs to pivot the tweeter. To aim the midrange, gently apply pressure
to the rim and pivot it in the desired direction. Subject to which speaker is being
used, there are two switches: one to adjust the treble, and one to adjust the bass.
Depending on the area the speaker will be installed, bass and treble are aected
by its surroundings. When the room has a lot of hard surfaces bass & treble are
bounced and reflected through the room, and if the room has soer surfaces the
bass & treble are absorbed. Adjust for the desired acoustic balance for each room.
7. Testing & Adjustments
Fit the grille over the speaker. The grille uses magnets to be held in place.
8. Installing the Grille
To Next Page
Loading...
Need help?
General
